CIOP4 4 Way Mimic Relay Board, 4 Inputs, 4 Outputs

KSh58,022.33

These addressable mimic relay boards, CIOP4 and CIOP8, are 4 and 8 way soft addressing output modules, incorporating integral short circuit isolators.

Both the CIOP4 and the CIOP8 mimic relay boards are fully compatible with the current range of Cooper intelligent addressable control panels. The units are suitable for switching low voltage (24V dc at 1A maximum), via a set of non latching relay contacts.

The flexibility of these modules is further enhanced by the fact that each output can be programmed for a range of triggers such as disablement, fault, fire, test panel, test zone prealarm, fire routing equipment, fire protecting equipment and reset with up to 16 different trigger sources per output.

Description

These addressable mimic relay boards, CIOP4 and CIOP8, are 4 and 8 way soft addressing output modules, incorporating integral short circuit isolators.

Product Description/ Features/ Specifications

These addressable mimic relay boards, CIOP4 and CIOP8, are 4 and 8 way soft addressing output modules, incorporating integral short circuit isolators.

Both the CIOP4 and the CIOP8 mimic relay boards are fully compatible with the current range of Cooper intelligent addressable control panels. The units are suitable for switching low voltage (24V dc at 1A maximum), via a set of non latching relay contacts.

The flexibility of these modules is further enhanced by the fact that each output can be programmed for a range of triggers such as disablement, fault, fire, test panel, test zone prealarm, fire routing equipment, fire protecting equipment and reset with up to 16 different trigger sources per output.

The trigger source can be global, by panel, by loop, by zone or by address. The logic is available in both OR & AND functions.

These units have an additional 4 inputs which can initiate a reset, silence, evacuate and test function.

They can be programmed using the CF3000 programmable site installer software and downloaded using the RS232 port.

Features

  • Loop powered
  • Units can be soft or hard addressed
  • Integral short circuit isolator
  • Single address
  • 4 input, 4 output version
  • 4 input, 8 output version
  • PCB version incorporates 4 inputs:
  • – Reset
  • – Silence
  • – Evacuate
  • – Test
  • 16 settings per output
  • Trigger types: fire, fault, disablement, test, prealarm, FRE, FPE, reset
  • Trigger source: global, by panel, by loop, by zone, by address
  • Logic functions (OR & AND)

Benefits

  • Quick and simple to install
  • Pluggable terminals for ease of wiring
  • Programmable via site installer software
  • Cost effective installation solution
Code CIOP4, CIOP8
Description 4 Way Mimic Relay Board (CIOP4)

8 Way mimic Relay Board (CIOP8)

Specification
Operating Voltage 24V dc to 30V dc
Operating Loop Voltage 18V dc to 30V dc
Current 1A (max)
Quiescent Current 6mA (nom)
Environmental
Humidity (Non Condensing) 0 to 95% RH
Physical
Construction Boxed ABS
Dimensions (HxWxD) Boxed – 180mm x 244mm x 63mm

Board – 113mm x 163mm

Weight Boxed – 1.2kg/ Board – 180kg
Ingress Protection Boxed – IP65
Compatibility
Suitable for use with Cooper Intelligent Addressable Fire Systems

1494486132DOC_-_CIOP4_CIOP8

Reviews

There are no reviews yet.

Be the first to review “CIOP4 4 Way Mimic Relay Board, 4 Inputs, 4 Outputs”

Your email address will not be published. Required fields are marked *